|
Delta Audiophile 2496 Problem.
|
View this Thread in Original format
| funkysouls |
I recently bought Delta Audiophile 2496. It is installed successfully but the output sound is very low.
I think it needs an amp for higher output but what else i noticed was, after installing Audiophile, my Volume page on "Sound and Audio Devices", Control Panel got disabled.
Also, it doesnt show an option to show the icon on task bar. weird.
Any thoughts ? |
|
|
| thecYrus |
| you need to use the delta mixer to control the volume.. the standard windows mixer can't be used.. |
|
|
| funkysouls |
| quote: | Originally posted by thecYrus
you need to use the delta mixer to control the volume.. the standard windows mixer can't be used.. |
The Delta Control Panel you mean... doesn't make much difference. :(
OR can can one recommend any settings on Delta control panel ? |
|
|
| thecYrus |
| it's already a long time ago since i used a audiophile. but you can switch the outputs between consumer and pro in this panel. the consumer should be louder.. |
|
|
| DJ RANN |
| quote: | Originally posted by thecYrus
it's already a long time ago since i used a audiophile. but you can switch the outputs between consumer and pro in this panel. the consumer should be louder.. |
Absolutely right. On the M-audio Delta control panel (look in start>settings>control panel) and click on the hardware tab. Select consumer. Then make sure all the faders on the mixer page up.
This will output at consumer line level which means if it's no loud enough then it's either your source (sequencer/media player/etc volume too low) or your gain staging from the output of your soundcard (i.e. hardware mixer set up inccorectly or underpowered amp etc.).
Also, don't use the driver that came on the disk - go to the M-audio site and download the latest. Uninstall the disk one completely then doa frsh install with the newer downloaded one. |
|
|
| funkysouls |
The Consumer thing worked. The rest of things are in place as said. Output has increased i feel..:)
ok, so the standard windows mixer wont work ?
I've already updated the drivers from M-audio's website since the one i got were 4 years old.
@ Rann, cyrus
Thanks a lot guys.
On a more serious note, should i still get a preamp ? |
|
|
| funkysouls |
| The sound output on reason 3 is still low for me to produce. *sad* |
|
|
| mysticalninja |
| quote: | Originally posted by funkysouls
The sound output on reason 3 is still low for me to produce. *sad* |
did you check the volume knob? lol! |
|
|
| funkysouls |
| quote: | Originally posted by mysticalninja
did you check the volume knob? lol! |
If you don't have anything useful to post, stay off. |
|
|
| mysticalninja |
| Hey I bumped your thread didn't I? |
|
|
| mysticalninja |
| Hey I see you have soundmax ... make sure that's turned up! |
|
|
| mysticalninja |
| That was the problem, wasn't it? haha. |
|
|
|
|
